FORESTRY WINCHES

for the modern lumberjack

MECHANICAL LOGGING WINCHES - TAJFUN

Simple and fast set up and take down,
Reliable and easy hydraulic (Type AHK and VIP PRO) or mechanical control (Type A),
Very simple and fast installation to tractor's three point mounting system,
Robotic welded stable and robust construction, made of high quality steel, laser cut and powder coated,
Sturdy drive line, each shaft with double bearings and double reduction gearing (winches from 10,000 Ibs to 22,500 Ibs),
Highly efficient clutch activation, even with mechanical winches – short pull, low activation pressure,
High efficiency and safety.

Tajfun started developing and manufacturing logging winches in 1979. We constantly update, upgrade and develop different winch types for different needs. The results of our long term development are:

LARGE AND MASSIVE DRUM (large capacity of the rope)

PARTICULARITY
• A large drum diameter (small loss of pulling power and longer rope lifespan)
• Strong drum walls
• Wide brake band
• High quality SKF bearings
• High pulling force and lower loading of component parts due to a 3 or 5 plate clutch
• Thick strengthened drive chain SKF.

EGV 35 A - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 7,900 lbs
Pulling Power: 7,900 lbs
Brake Power: 9,900 lbs
Gear Ratio: 1: 7.5
Rope Velocity (at 540 rpm): 24.75'' - 46.5''/s
Required Tractor Capacity: 15 - 35 HP
Weight Without Wire Rope: 530 lbs
Mounting: I, II
Width: 48''
Lenght: 19,25''
Transport Height: 50''
Overall Height: 79''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 45 A - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 10,000 lbs
Brake Power: 12,500 lbs
Gear Ratio: 1 : 8.89
Rope Velocity (at 540 rpm): 21.25'' - 42.5''/s
Required Tractor Capacity: 20 - 50 HP
Weight Without Wire Rope: 728 lbs
Mounting: I, II
Width: 55''
Lenght: 21''
Transport Height: 54''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 45 AHK - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 10,000 lbs
Brake Power: 12,500 lbs
Gear Ratio: 1 : 8.89
Rope Velocity (at 540 rpm): 21.25'' - 42.5''/s
Required Tractor Capacity: 20 - 50 HP
Weight Without Wire Rope: 772 lbs
Mounting: I, II
Width: 55''
Lenght: 21''
Transport Height: 54''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 55 A - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 12,250 lbs
Brake Power: 15,500 lbs
Gear Ratio: 1 : 8.9
Rope Velocity (at 540 rpm): 21.25'' - 42.5''/s
Required Tractor Capacity: 35 - 70 HP
Weight Without Wire Rope: 761 lbs
Mounting: I, II
Width: 60''
Lenght: 23''
Transport Height: 63''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 55 AHK - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Information

Pulling Power: 12,250 lbs
Brake Power: 15,500 lbs
Gear Ratio: 1 : 8.9
Rope Velocity (at 540 rpm): 21.25'' - 42.5''/s
Required Tractor Capacity: 35 - 70 HP
Weight Without Wire Rope: 785 lbs
Mounting: I, II
Width: 60''
Lenght: 23''
Transport Height: 63''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 65 A - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 14,500 lbs
Brake Power: 18,000 lbs
Gear Ratio: 1 : 10.8
Rope Velocity (at 540 rpm): 19.5'' - 38.75''/s
Required Tractor Capacity: 50 - 90 HP
Weight Without Wire Rope: 1,136 lbs
Mounting: II, III
Width: 66''
Lenght: 27''
Transport Height: 69''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 65 AHK - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 14,500 lbs
Brake Power: 18,000 lbs
Gear Ratio: 1 : 10.8
Rope Velocity (at 540 rpm): 19.5'' - 38.75''/s
Required Tractor Capacity: 50 - 90 HP
Weight Without Wire Rope: 1,191 lbs
Mounting: II, III
Width: 66''
Lenght: 27''
Transport Height: 69''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 65 AHK ZS - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 14,500 lbs
Brake Power: 18,000 lbs
Gear Ratio Back: 1 : 10.8
Gear Ratio Front: 1 : 18.6
Rope Velocity (at 540 rpm): 19.5'' – 38.75''/s
Required Tractor Capacity: 50 - 90 HP
Weight Without Wire Rope: 1,191 lbs
Mounting: II,III
Width: 66''
Lenght: 26''
Transport Height: 69''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

One-way hydraulic winch with the possibility of mounting at the rear and front of the tractor, making your tractor more versatile. This winch has a robust gearbox with oil-bath toothed wheels. Machine equipped with a robust integrated gearbox whose gear is submerged in oil, second stage control chain and additional tensioner, which improves the tension of the cable and ensures the quiet work of the winch.

• In the front position, the winch is connected to the tractor with the shaft above the standard revolutions 1000 min-1, the price of force turns to the right.

• In the rear position, the winch is coupled with the tractor with the gimbal lower at 540 min-1 and a left rotation.

EGV 85 A - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 19,000 lbs
Brake Power: 23,500 lbs
Gear Ratio: 1 : 10.7
Rope Velocity (at 540 rpm): 20'' - 43''/s
Required Tractor Capacity: 70 - 135 HP
Weight Without Wire Rope: 1,275 lbs
Mounting: II, III
Width: 71''
Lenght: 27''
Transport Height: 70''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 85 AHK - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power:;19,000 lbs
Brake Power: 23,500 lbs
Gear Ratio: 1 : 10.7
Rope Velocity (at 540 rpm): 20'' - 43''/s
Required Tractor Capacity: 70 - 135 HP
Weight Without Wire Rope: 1,301 lbs
Mounting: II, III
Width: 71''
Lenght: 27''
Transport Height: 70''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

EGV 105 AHK - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 22,500 lbs
Brake Power: 28,100 lbs
Gear Ratio: 1 : 12.1
Rope Velocity (at 540 rpm): 19.75'' - 40''/s
Required Tractor Capacity: >100 HP
Weight Without Wire Rope: 1,764 lbs
Mounting: III
Width: 77''
Lenght: 31''
Transport Height: 76''
Overall Height: 91''

Standard Bottom Pulley
Standard Coupling
Standard Differential Brake Band

DGV 2X55 AHK - TAJFUN

DOUBLE DRUM LOGGING WINCH

Technical Data

Pulling Power: 2 × 12,300 lbs
Brake Power: 15,500 lbs
Gear Ratio: 1 : 9.1
Rope Velocity (at 540 rpm): 20.75'' - 40.75''/s
Required Tractor Capacity: 80 - 135 HP
Weight Without Wire Rope: 1,522 lbs
Mounting: II (III)
Width: 78''
Lenght: 26''
Transport Height: 71''
Overall Height: 91''

Double Drum Logging Winch DGV 2x55 AHK is a winch with three point connecting system, intended for heavy logging. Its modern design offers wide usability, easy and reliable operation and long lifespan.

VIP PRO 90 - TAJFUN

SINGLE DRUM LOGGING WINCH

Technical data

Pulling Power: 20,230 lbs
Brake Power: 25,291 lbs
Gear Ratio: 1:13,7
Rope Velocity (at Standard No of Rev. of P.T.O. Shaft 300 rpm): 10.63'' - 17.32''/s
Rope Velocity (at Standard No of Rev. of P.T.O. Shaft 540 rpm): 19.68'' - 31.10''/s
Required Tractor Capacity: 100 - 150 HP
Weight Without Wire Rope: 2,050 lbs
Max. Drum Capacity: 426.5' ø 13 mm
Mounting: II, III
Width(B): 78.74''
Length (L) - Middle position of movable logging blade: 34.25''
Transport Height (H1): 73.62''
Overall Height (H2): 90.55''
Bottom Pulley: Standard
Differential Brake Band: Standard
Radio Remote Control: Optional

Robust gearbox with high efficiency (98%)

High quality STRENX® and HARDOX® frame
Pull-activated wire rope feeding (adjustable) prevents uncontrolled wire rope unwinding
Continuous regulation of wire rope feeding speed
Winder enables excellent wire rope winding on the drum
Limit switch
Lower pulley
Hydraulically movable logging blade
Radio remote control (option)

TAJFUN

WINCH ACCESSORIES

RADIO REMOTE CONTROL - TAJFUN

"REMOTE" FOR FORESTRY WINCH

Frequency Band: 2.3' ISM Band

Transmission Capacity: 10 mW ERP

System Addresses: 16 mio Unique Addresses

Modulation Type: GMSK / Halbduplex

Control Commands: 7/10 1 x Emergency Switch / 1x Alarm

Temperature Range: -4 F to +140 F

Transmitter

Power Supply: 2 x AA NiMH- Rechargeable Batteries 1,2V / 1900 mAh

Housing: 2 K poliamid / 66-GF+TPE

Protection Type: IP 65

Height x Width x Length: 4.5'' x 6.25'' x 2.5''

Weight: 1.3 Ibs

Antenna: Integrated

Receiver

Power Supply: 10 V do 30 V DC

Housing: PC ABS

Protection Type: IP 65

Height x Width x Length: 6'' x 8.5'' x 2'’

Weight: 1.5 Ibs

Antenna: Optional Integrated - Outside Connection

B&B F10 ET and DT

New shape allows optimum body fit in all situations
Large control panel, inclined control panel, integrated safety belt ribbon
Plastic high hardness construction with rubber coated edges
More carrying options (on hip, chest or abdomen)
Replaceable ordinary batteries (AA); high quality Sanyo Eneloop batteries are included
Two way radio technology
DIN standard compliant Stop and Emergency Switch
Standard movement and position Sensors
Optional GPS enabled Emergency Switch
5 year warranty for registered customers

TAJFUN

WINCH ACCESSORIES

ADDITIONAL ELEMENTS FOR WIRE ROPE

WIRE ROPE

Wire rope compatibility with particular winch models and maximum wire rope lengths are quoted in the technical data table, next to particular winch description.

Article number	Description	Diameter	Weight	Breaking Force
503453	6 S-V	Ø 9 mm	0,453 kg/m	92,05 kN / 20,694 Ibs
503454	6 S-V	Ø 10 mm	0,543 kg/m	111,47 kN / 25,059 Ibs
503446	6 F-V	Ø 11 mm	0,655 kg/m	133,23 kN / 29,962 Ibs
503447	6 F-V	Ø 12 mm	0,764 kg/m	152,79 kN / 34,348 Ibs
503448	6 F-V	Ø 13 mm	0,881 kg/m	180,00 kN / 40,465 Ibs
503449	6 F-V	Ø 14 mm	1,01 kg/m	210,00 kN / 47,210 Ibs
503450	6 F-V	Ø 16 mm	1,290 kg/m	238,98 kN / 52,650 Ibs

Hooks

Article number	SLIDING	Wire Rope Diameter
500079	Sliding hook	Ø 9 - Ø 13 mm / Ø 0.35''–Ø 0.50''
500070	Parallel hook P7-8	Ø 9mm / Ø 0.35''
500071	Parallel hook P10	Ø 10 - Ø 13 mm / Ø 0.40''–Ø 0.50''
500072	Parallel hook P13	Ø 14 mm / Ø 0.55''

Ball Joints

Article number	PIVOTING, ROTATING	Wipe Rope Diameter
504398	Pivoting Ball Joint - for chain lock	Ø 8 - Ø 10 mm / Ø 0.31''–Ø 0.50''
504399	Pivoting Ball Joint - for chain lock	Ø 10 - Ø 13 mm / Ø 0.40''–Ø 0.50''

Sliders simples et rotatifs

Code produit	Description	Diamètre du câble
500090	Slider with chain lockPOK	Ø 13 mm– / Ø 0.50''–
500089	Rotating slider with chain lock D7-8	Ø 12 mm – / Ø 0.47''–
504155	Rotating slider with link and chain lock D7-8	Ø 12 mm – / Ø 0.47''–

AUTRES ACCESSOIRES DE TREUILS

FUEL CONTAINER HOLDER

The fuel container holder can be installed on the left or right side of the safety net.

Support	Poids	Largeur x Longueur
Fuel Container Holder	3,6 kg / 8.0 Ibs	155-188 x 343 mm / 6''–7.4'' x 13.5''
Fuel Container Holder XL	3,8 kg / 8.0 lbs	155-188 x 343 mm 6''–7.4'' x 15''

CHAINSAW HOLDER

can be installed on the left or right side of the safety net. One winch can hold up to two holders.

Support

Poids

CHAINSAW HOLDER

1,36 kg / 3.0 Ibs

CHAIN HOLDER

Support	Poids	Largeur x Longueur
CHAIN HOLDER	1,2 kg / 2,65 lbs	67 x 138 x 80 mm / 2.6" x 53.4" x 3.1"

TAJFUN P.T.O. SHAFTS

Easy to use, user friendly C Line connection.
Flexible protection hood, which allows easy access to connecting mechanism and grease nipples Tajfun P.T.O. Shaft.

Cardans	Dimensions
P.T.O. Shaft Tajfun C Line-T 2BR+ KK560	1⅜” Z6 - 1 ⅜” Z6 ; L 560*
P.T.O. Shaft Tajfun C Line-T 4BR+ KK560	1⅜” Z6 - 1 ⅜” Z6 ; L 560*
P.T.O. Shaft Tajfun C Line-T 6BR+ KK560	1⅜” Z6 - 1 ⅜” Z6 ; L 560*

EGV SAE J2513 - TAJFUN

ADAPTER for mounting Tajfun LOGGING WINCHES on SKID-STEER and COMPACT TRACK LOADERS

NEW SKID STEER ADAPTER EGV SAE J2513

For mounting Tajfun Logging Winches on Skid-steer and Compact Track Loaders

Introducing the versatile Skid Steer Adapter designed to seamlessly integrate Tajfun winches (EGV 45 A/AHK, EGV 55 A/AHK, EGV 65 A/AHK and EGV 85 A/AHK) with a range of machinery, such as Skid-steers and Compact Track Loaders.

This adapter is specifically engineered to meet the stringent requirements of the SAE J2513 standard, making it compatible with leading brands such as Bobcat CAT, Kubota, and JCB and others.

To optimize the functionality and performance of winches on these machines, we recommend the use of additional equipment listed in the table below.

This innovative solution ensures a secure and efficient connection, enhancing the operational capabilities of your machinery with the trusted quality of Tajfun winches.

HYDRO POWER UNIT HP 25 AND HP 30
is a tractor P.T.O. drive replacement for a forestry winch.

The drive is equipped with a hydraulic otor that is attached to the frame of the forestry winch. The connection to the forestry winch is direct, without a P.T.O. shaft (cardan). This solution is ideal if no P.T.O. drive is available, only the hydraulic system of the
power unit. The hydro power unit is connected to the power unit with hydraulic hoses, and power is guaranteed. The unit includes a meter showing the number of rpm and the working hours.

AUTRES ACCESSOIRES DE TREUILS

Spécifications	Adaptateur pour mini-charges à SAE J2513
HAUTEUR	602 mm
LONGUEUR	1147 mm
LARGEUR	417 mm
POIDS	64 kg

Adapteur pour mini-chargeuse EGV SAE J2513

Pour le montage des treuils forestiers Tajfun sur des mini-chargeuses et des chargeuses compactes sur chenilles Découvrez l’adaptateur polyvalent pour mini-chargeuse, conçu pour intégrer parfaitement les treuils Tajfun (EGV 45 A/ AHK, EGV 55 A/AHK, EGV 65 A/AHK et EGV BS A/AHK) à divers équipements, comme les mini-chargeuses et les chargeuses compactes sur chenilles. Cet adaptateur est spécialement conçu pour répondre aux exigences strictes de la norme SAE J2513, le rendant compatible avec des marques de premier plan comme Bobcat CAT, Kubota, JCB et autres. Afin d’optimiser les performances des treuils sur ces machines, nous recommandons l’utilisation d’équipements supplémentaires figurant dans le tableau ci-dessous. Cette solution innovante garantit une connexion sécurisée et efficace, améliorant les capacités opérationnelles de vos équipements grâce à la qualité éprouvée des treuils Tajfun.

Code du produit	Équipements supplémentaires recommandés
252483	Unité d’entraînement hydraulique HP 25 EGV 45 + 55
248124	Unité d’entraînement hydraulique HP 25 EGV 65
255088	Unité d’entraînement hydraulique HP 30 EGV 85
255088	Jeu de raccords hydrauliques ISO16028
263493	Levier de frein mécanique CAT 2 M27X3 350-550

GRAVEL

HYDRAULIC FORESTRY WINCHES

Models

RG-34
RG-48

FORESTRY HYDRAULIC
LOG SKIDDER

Model RG-34 and RG-48

GRAVEL

HYDRAULIC WINCH HEAD

SPECIFICATIONS	RG-34	RG-40
Pulling Capacity (empty drum)	15 000 lb6 700 kg	20 000 lb8 900 kg
Pulling Capacity (full drum)	5 137 lb 2 330 kg	6 753 lb 3 063 kg
Recommanded pump flow	15 à 20 gpm 68 à 90 lpm	20 à 30 gpm 90 à 136 lpm
Speed (empty drum)	31 pi/min 9 m/min	34 ft/min 10 m/min
Speed (full drum)	92 pi/min 28 m/min	76 ft/min 23 m/min
Cable (1)	3/8 x 150’ *	7/16 x 150’ *
Chokers (2)	7/16 x 6 T3C	7/16 x 6 T3C

Dimension and Weight	RG-34	RG-40
Lenght (A)	25 in	27 in
Plate lenght (B)	16,5 in	18,5 in
Plate width (C)	16 in	17 in
Overall width (D)	23 in	24 in
Height (E)	17,5 in	20 in
Weight	N/D	500 lb

Note : Calculations are theoretical and based on a pressure of 3000 PSI
* All cables are pressed with button

FORESTRY WINCHES

To retrieve and remove trees effortlessly we have the right forestry winch for you. Whether it is a hydraulic or mechanical model, we have the model that will suit your particular needs. Strong, safe and durable forestry winches for individuals and contractors. Powerful tools for small and large jobs.