ABRASIVE SPREADER

Sand, crushed rock, and de-icing salt mix

ROBUST CONSTRUCTION
11-gauge steel bucket with removable sieve grid.
EFFICIENT CONVEYOR
13” self-cleaning chain conveyor.
HYDRAULIC ACCURACY
Hydraulic motor-assisted spreading with independent flow control for conveyor and turnstile.
SOLID CHASSIS
Body mounted on a tubular chassis with tandem suspension and axles weighing 3500 lbs each.
SAFETY AND DURABILITY
8000 lbs hydraulic brake, regulation lighting, rotating beacon, galvanized treated steel or anti-corrosion treatment with customizable urethane paint.
OPTIONAL MOTORISATION
Gas Engine

The conical hopper is manufactured from 11‑gauge steel plate.
The hopper and the entire structure are fully galvanized.
The hopper is bolted to a chassis made of 3" x 2" x 3/16" tubular steel, allowing it to be mounted and used on other types of equipment.
The selected abrasive—sand, salt, gravel, or a mix—is delivered to the spinner by a self‑cleaning #662 chain conveyor, 13‑1/2" wide. The conveyor is powered by a high‑performance hydraulic motor.
A 15‑inch diameter rubber‑coated composite spinner, also powered by a hydraulic motor.
The speed of both hydraulic motors is independently controlled by a dual flow controller, ensuring precise spreading performance.
Tandem suspension with slipper springs and two 3,500‑lb capacity axles.
Hydraulic brakes assisted by an 8,000‑lb hydraulic actuator.
Regulation LED lighting, adhesive reflectors, reflective striping, and beacons.
Two guide brooms defining the spreading width and a directional projection guide.
A removable screening grate covering the top of the hopper.
Removable steel fenders.
Guillotine‑style access openings at both ends of the hopper.
Attachment options: tongue, ball hitch, clevis pin, or ring hitch.
Overall dimensions: 48" width x 139" length.
Total height: 62".
Ground clearance: 14 inches.
Capacity: 2.25 cubic yards.